New springs for coilovers

Originally my BC-Racing coilovers were meant for Nissan S13. Spring rate was way too hard for S30, so I changed softer springs. Originally springs were 8kg/mm in front and 6kg/mm in rear. I used 4kg/mm in front and 5kg/mm in rear and now it is perfect.

Also tried few laps in our local car club track day.
Photo credits goes for Ville Järvenpää.

Six months after I started this project car is finally in driving condition. There is still some interior parts that are not mounted but at least I can drive it now.
Also found out that suspension is way too hard, so need to get new softer springs.

If you compare these pics that were taken when car was still in US I hope you can find some improvement. :)